- 1. 3 monitor setup for laptop
- (Tips & Tricks)
- ... on sale because it lacked speakers and lacked HDMI input (only offered VGA/DVI). Guess what? DVI is HDMI without the audio! You can purchase an HDMI to DVI connector cable for just a few bucks. I also ...
- Created on August 22, 2015
- 2. DV Expo, Sept 20-22, 2011 - Pasadena CA
- (Upcoming Events)
- Digital Video Expo is the premier destination for content creation professionals to explore the latest technologies, learn from world-class professionals and connect with peers who share the same passion. ...
- Created on September 06, 2011
- 3. For week ending April 2, 2021
- (CSUN - CTVA 358)
- ... from shot to shot c) so that you can pre-slate d) for smooth control over the input signal 9) You are using a Mackie 1402 mixing panel to feed audio to your 4-track recorder and need to connect 3 “direct ...
- Created on March 29, 2021
- 4. For week ending April 23 & 30, 2021
- (CSUN - CTVA 358)
- ... cable from your phone, or a thick shoelace, or a piece of wire. Even the connector end of a headphone. Your lavalier mounting clip for the Newsman's loop could be a simple tie clip, or jewelry clip, or ...
- Created on April 21, 2021
- 5. For week ending April 3, 2020 UPDATED
- (CSUN - CTVA 358)
- ... the "lavalier" could just be a charging cable from your phone, or a thick shoelace, or a piece of wire. Even the connector end of a headphone. Your lavalier mounting clip for the Newsman's loop ...
- Created on March 29, 2020
- 6. For week ending Dec 11, 2020
- (CSUN - CTVA 358)
- ... the strain relief on the cable c) spray Static Guard under the sport coat d) secure the XLR connector at the ankle You're mixing a commercial promo inside of a very large Bally’s Fitness center. The ...
- Created on December 04, 2020
- 7. For week ending May 14, 2021
- (CSUN - CTVA 358)
- ... XLR connector at the ankle You're mixing a commercial promo inside of a very large Bally’s Fitness center. The shot features men and women vigorously peddling in a large cluster of electronic exercise ...
- Created on May 10, 2021
- 8. For week ending Nov 20, 2020
- (CSUN - CTVA 358)
- ... "lavalier" could just be a charging cable from your phone, or a thick shoelace, or a piece of wire. Even the connector end of a headphone. Your lavalier mounting clip for the Newsman's loop could ...
- Created on November 13, 2020
- 9. For week ending Oct 30, 2020
- (CSUN - CTVA 358)
- ... a Mackie 1402 mixing panel to feed audio to your 4-track recorder and need to connect 3 “direct outs” from the panel to the inputs of the recorder. To do this you will need: a) stereo RCA to XLR male ...
- Created on October 26, 2020
- 10. Hiring: fulltime field producer/shooter
- (Job Postings / Internships)
- ... in Asian and Asian-American food, culture, dynamics, and issues • We're from Washington, but are currently based in L.A. (and previously N.Y.), so we'd like to connect with someone who has a similar worldly ...
- Created on March 01, 2019
- 11. LAPPG mtg - Oct 9, 2013, Los Angeles
- (Upcoming Events)
- ... displays and peripherals, providing the industry’s fastest, most versatile I/O connection. A Look At Canon Cameras Genaro Arroyo, a Canon Professional Marketing Representative will give an overview of ...
- Created on October 01, 2013
- 12. Lavalier rods & sticks
- (Tips & Tricks)
- ... down as far as possible, and then just using external finger pressure from outside the clothing to slide the lavalier connector the rest of the way. That can be a bit intrusive and some actors/actresses ...
- Created on March 12, 2015
- 13. NAMM 2012 Anaheim CA
- (Upcoming Events)
- Just a reminder that the NAMM Show is coming up on Jan 19-22, 2012 at the Anaheim Convention Center. For those of you who are not familiar with this tradeshow, it is to the music industry what NAB is ...
- Created on December 29, 2011
- 14. New 664 recorder from Sound Devices
- (Product Announcements)
- ... configurations on XLR, 10-pin and TA-3 connectors, up to four channels of AES inputs (AES-3, AES42), and up to eight channels of AES3 outputs. The CL-6 Input Expander is also available for applications ...
- Created on September 12, 2012
- 15. Quick instructions for PMD660 recorder
- (Tips & Tricks)
- ... FORMAT is displayed. Press ENTER, then confirm with ENTER. To connect via USB: 1. Connect USB cable to computer. 2. From power off, hold COPY/USB button while turning on the power switch. Presets: 1. ...
- Created on September 06, 2011
- 16. Samson announces a new website
- (Product Announcements)
- ... contact options to connect with us via email, Facebook, Twitter and YouTube. You can also use the site to sign up for the monthly newsletter and stay current on all that’s happening at Samson. Designed ...
- Created on September 07, 2011
- 17. Tascam dr-100/MKII vs Marantz PMD660/661
- (General Questions)
- ... (thumbs up) +SPDIF inputs (I saw many complaints about this not being a feature in the regular DR-100, which made the Marantz, for many, more desirable. Allowing you to connect external digital signals… ...
- Created on September 19, 2012
- 18. Wireless Booms?
- (General Questions)
- ... the body pack transmitter to the belt of the Boom Operator, and run a short jumper cable from the transmitter input from a Denecke PS-1 condenser power supply, also on the belt. Connect the mic cable from ...
- Created on October 03, 2011
- 19. Cables & Connections
- (Category)
- Created on August 26, 2011
- 20. Reconnecting to Quicken to update banking transactions
- (Fred's Blog )
- ... account transactions from my bank. Their website just kept saying, Quicken server error -- try again later. Later came and went, but Quicken still was not able to sucessfully connect and download my data. ...
- Created on March 18, 2018
- 21. There is more to learning Filmmaking than filmmaking.
- (For Students)
- ... catastrophic software crashes is to never poop where you eat, so to speak. Dedicate one computer to filmmaking, and only populate it with professionally relevant software. Keep it physically disconnected ...
- Created on January 18, 2022
- 22. Software for Podcasting
- (Production Advice)
- ... its own track. Your guest is sent a link, which connects them to you. Their audio track shows up on a separate timeline, right under yours. You check your software/hardware settings such as mic level; ...
- Created on February 11, 2021
- 23. NAB moved to October 9-13, 2021
- (News)
- ... to observe the industry come together in many ways to work through these challenging times, and it has been our pleasure to do our part to create connections via our new digital initiatives. As we look ...
- Created on September 09, 2020
- 24. Mic advice for instructors who teach online & hybrid
- (Workshops)
- This presentation will cover: -How to achieve better audio for online as well as hybrid teaching -Selecting a good microphone for the instructor -Including audio from face-to-face students -Connecting ...
- Created on August 06, 2020
- 25. Terms of Use
- (Legal)
- ... media channel, mobile website or mobile application related, linked, or otherwise connected thereto (collectively, the “Site”). You agree that by accessing the Site, you have read, understood, and agreed ...
- Created on July 23, 2020
- 26. Videos about Sound Devices 688 and CL-12
- (News)
- ... Chapter 2: CL-12 Connection to the 688 https://www.youtube.com/watch?v=TZN04k6x3nc&list=PLKpAunZPiGRnhbWuQRmkjNL331mCz6415&index=2 Chapter 3: CL-12 Menus https://www.youtube.com/watch?v=J8nHNhOB7ZU&list=PLKpAunZPiGRnhbWuQRmkjNL331mCz6415&index=3 ...
- Created on April 28, 2020
- 27. FaceBook "Sound and Food" closed (private) grou
- (Sound Q BBQ)
- ... grilling, and cooking in general. So not only do you get to share your culinary interests, but it also keeps you connected with members of our industry. You do need to ask permission from the Admin to ...
- Created on September 02, 2019
- 28. Basic sound package for student productions
- (Production Planning)
- ... output). Make sure that you include all of the necessary input/output cables for your system. USB to connect recorder to fader controller; TA3-XLRf input cables; TA3-XLRm output cables; timecode out ...
- Created on March 22, 2019
- 29. Photo Trap Change Detection
- (Production Advice)
- ... with my background, in addition to being a film soundmixer, I have also worked with, as well as instructed audio for, various organizations connected with law enforcement and government video production ...
- Created on September 10, 2018
- 30. Syllabus
- (CTVA 358)
- ... may be particularly upsetting for some survivors; we encourage all students to seek the support they need. While making personal connections with the topics studied in any course can be a meaningful ...
- Created on August 22, 2017
- 31. Syllabus
- (Sample Syllabus)
- ... may be particularly upsetting for some survivors; we encourage all students to seek the support they need. While making personal connections with the topics studied in any course can be a meaningful ...
- Created on August 22, 2017
- 32. ProTools: Interface or Bus
- (Post Production)
- ... physical pieces of hardware. They are pathways to route signals within Pro Tools between tracks. Think of them as patch cables, or pipelines. You can use a bus to connect the output from one track to ...
- Created on September 20, 2016
- 33. Mic Level vs Line Level
- (Recorders)
- ... options to do so, it is always preferable to run line level signals to line level inputs in order to minimize the risk of interference. But when you are connecting a raw microphone to a recorder or mixer, ...
- Created on April 09, 2016
- 34. CAS Student Scholarship Award
- (Networking)
- ... to the winners. But even more valuable than the cash award is the networking opportunities afforded the winners -- a chance to meet, connect with, and maybe even work with pretty much anyone and everyone ...
- Created on September 16, 2015
- 35. How to Solder
- (Cables & Connections)
- Here is a simple comic book style tutorial on How to Solder. It was provided to us by one of the engineers here at CSUN, and covers the basics of soldering a connection.Sooner or later, we all must solder ...
- Created on September 02, 2015
- 36. Dumb Idea of the Week
- (Fred's Blog )
- The idea behind the Lav Bullet is not new. Attach a weight to the end of a lavalier connecting cord and drop it down behind wardrobe. We've been doing that for years, only that we olde tymers just used ...
- Created on August 27, 2015
- 37. Setting Up Your Rycote Windshield
- (Windscreens & Shockmounts)
- ... of the mic. Make sure that you have attached the short and thin jumper XLR connector cable that runs between the mic and handle of the grip. Gently bend the excess protruding cable back along the connector ...
- Created on March 22, 2015
- 38. Lav Rods & Sticks
- (Fred's Blog )
- ... up or down as far as possible, and then just using external finger pressure from outside the clothing to slide the lavalier connector the rest of the way. That can be a bit intrusive and some actors/actresses ...
- Created on March 12, 2015
- 39. Lav Rods & Sticks (old school style)
- (Lavalier)
- ... up or down as far as possible, and then just using external finger pressure from outside the clothing to slide the lavalier connector the rest of the way. That can be a bit intrusive and some actors/actresses ...
- Created on March 12, 2015
- 40. Basic Equipment Package
- (Production Planning)
- ... for the recorder and mixer/fader controller are essential. One also needs to have the correct connecting cables to get timecode out of the recorder and into the Denecke slate. Always travel with a complete ...
- Created on February 02, 2015
- 41. Izotope RX4 playback in Pro Tools
- (Post Production)
- ... RX Monitor: When and How to Use It When using RX Connect, some DAWs monopolize the system's audio drivers, preventing RX from playing audio through the same output device. The RX Monitor plug-in ...
- Created on January 13, 2015
- 42. System 10 Wireless: First Look
- (News)
- ... performs very closely to the AT899. Of course, you could use any lavalier wired with the cW (hirose) connector, such as Tram and Countryman -- or any of the lower end Audio Technica lavs -- but I believe ...
- Created on November 23, 2014
- 43. Improve Audio for Video: Keep Mics Off of Camera
- (Shotgun)
- The following article was orginally written for Music Connection. In the previous article, we stressed the need for proper monitoring of your audio and careful selection of your headphones. This month, ...
- Created on August 25, 2014
- 44. Improve Audio for Video: Headphones
- (Other Accessories)
- ... originally written for and published by Music Connection. Did I forget to mention that you should only shoot with a camcorder that can provide headphone output? Along with external microphone input? ...
- Created on May 20, 2014
- 45. No time for playback
- (Fred's Blog )
- ... least the DIT) needs to play back at least a significant portion of the virgin take to insure that things are operating correctly. Lots of little things can go wrong during the initial setup: connections, ...
- Created on March 19, 2014
- 46. Zoom Q4: first look (second look)
- (Recorders)
- ... area and select files for playback or deletion. Connect to your computer via the (supplied) USB cable. The Q4 does not come with an external battery charger, but charges within the camera via USB. You ...
- Created on February 09, 2014
- 47. Sync Playback: revisited
- (Audio Techniques)
- ... act of playback. The slate and the playback recorder/deck need to be physically connected by a cable or wireless transmitter/receiver. The presence of the visual timecode allows the editors to match ...
- Created on April 11, 2013
- 48. Location Sound Bible by Ric Viers
- (Book Reviews)
- ... cables and connectors. Written by Ric Viers, author of The Sound Effects Bible, this book takes you behind the scenes of Viers’ work on feature films, television shows, broadcast news, courtroom dramas, ...
- Created on January 20, 2013
- 49. Advice for First Feature Indie
- (Fred's Blog )
- ... subsequently purchased a Zoom h4n recorder and, after plugging it directly into my camera via the standard 3.5mm audio input and still receiving awful quality, I also purchased an attenuator cable to connect ...
- Created on November 14, 2012
- 50. Updates for the Tascam HS-P82
- (Recorders)
- ... is feeding the Tascam. It does require a physical (or wireless) connection between the master timecode (camera) and your recorder. However, it will satisfy those XXXXXXXX editors who have brainwashed the ...
- Created on October 21, 2012
- 51. Adobe Story Free Software
- (Fred's Blog )
- ... Movie Magic Screenwriter, and Microsoft Word. Access your projects anywhere you have an Internet connection. • Adobe Story Plus is a complete, collaborative scheduling and preproduction solution. Stay ...
- Created on October 21, 2012
- 52. M-S Stereo Simplified
- (Sound Design)
- ... right. If you were to look down at the single unit M-S shotgun mic or figure 8 mic (with the XLR connector or back of the mic towards you, and the head of the mic aimed away from you, and the words THIS ...
- Created on August 17, 2012
- 53. Film Festivals vs Trade Shows
- (Fred's Blog )
- ... of each exhibit or presentation, but also to pay attention to the people sitting or standing next to you watching that same presentation. Because they are your connection to the industry! Always take the ...
- Created on June 12, 2012
- 54. Duplex Boom Cables
- (Cables & Connections)
- ... connector at the panel end would be, of course, an XLRm connector for the signal from the boom microphone. AT the boom operator's end, there is a small metal box with a belt clip. The box features an XLRf ...
- Created on April 06, 2012
- 55. Preparing for NAB 2012
- (Fred's Blog )
- ... We will also be showing the Presonus 16.4.2 digital mixing board, connected up to the Tascam HS-P82 8+2 multitrack portable timecode recorder. Microphones hooked up to the system will include the BP4071 ...
- Created on April 06, 2012
- 56. Why the broadcast industry prefers compact flash
- (Fred's Blog )
- ... speeds, easier data recovery in case of failure and the CF connector is rated for 10k+ insertions (SD is rated around 1k). The SD card has its connection metal area exposed (scratches/grime) where the ...
- Created on December 22, 2011
- 57. Student Projects
- (Fred's Blog )
- ... as a furry outer cover for a zeppelin, but no zeppelin. A transmitter, but no receivers. Boompoles, but no shockmounts. No mention of long XLR cables for running mics, or for connecting to video cameras. ...
- Created on December 15, 2011
- 58. User Guide to the Tascam HS-P82 for Film/Video Applications
- (Recorders)
- ... The Tascam can be powered from internal batteries, AC adapter, or external 12vDC via industry standard XLR 4-pin connector. The unit comes with an NP style Battery pack that takes 10 AA alkalines. ...
- Created on November 29, 2011
- 59. ISO outputs from Mackie mixers
- (Mix Panels)
- ... Onyx mixer, there are Direct Outs (labeled Recording Out by Mackie) provided by means of a DB25-XLR breakout cable. Actually, there are two of these DB25 connectors: one for inputs 1-8 and a second one ...
- Created on November 13, 2011
- 60. Regarding Senior Thesis Films
- (Fred's Blog )
- ... (Yeah, one team forgot that they even needed one.) What about the connecting cables to jam the slate to your recorder? Make sure that you have all of the necessary connectors at both ends. Recorder format. ...
- Created on November 12, 2011
- 61. Sound for Surfing
- (Production Advice)
- ... then told me that they had no budget for a zodiac, and planned to shoot everything from an HDSLR in an underwater housing, from a surfboard! Large, bulky, expensive. No way to get audio connections in. ...
- Created on September 10, 2011
- 62. Introduction to Production Sound
- (Production Planning)
- ... the boom man during a take, audio returns for the boom men, and a 1-K tone oscillator for setting reference levels. If you are working in video, then be very cautious of all electrical connections (VTR, ...
- Created on August 29, 2011
- 63. Tips for Working Film Festivals
- (Networking)
- ... a bunch of films; you can pretty much do that at home! You are there to hobnob with the players in the industry, to make career connections, and jump onto the fast track of the filmmaking path. Here ...
- Created on August 29, 2011
- 64. Foley on a Shoestring Budget
- (Post Production)
- ... the picture. In that case, you would connect the line output from a mixing panel to the line input on your laptop, and record audio directly to the editing program. But if your editing setup is not that ...
- Created on August 29, 2011
- 65. The Talkshow
- (Sample Exercises)
- ... supplies and XLR connections should be secured on talent, so that they can just be plugged in to waiting XLR mic cables, or disconnected so that talent can leave the set area. Never allow the students ...
- Created on August 28, 2011
- 66. Audio Performance of the RED One Camera
- (Videography)
- Written by our friends over at Sound Devices, acclaimed manufacturer of digital recorders and field mixers. Since it began shipping, Sound Devices has received numerous inquiries concerning audio interconnection ...
- Created on August 28, 2011
- 67. Audio for Television: Mixing the Basic Event
- (Production Planning)
- ... cable to take the Aux Send output of the mixer (usually a ¼-inch jack) into the bodypack transmitter (connector will vary base on the make/model of your wireless). Most wireless mic portable (camera mountable) ...
- Created on August 26, 2011
- 68. Monitoring the Soundtrack
- (Audio Techniques)
- ... classes that I instruct, I will often (purposely) disconnect the audio feed from the mixer to the camera, and then ask everyone after the take, "How is everything? Picture good? Sound okay?" (left) Sony ...
- Created on August 26, 2011
- 69. Adding Phone Conversations to your Recording
- (Audio Techniques)
- ... downloaded and installed onto your laptop or desktop computer. It allows you to connect to one or more other computers anywhere in the world, and talk. If you are webcam equipped, you can even video conference. ...
- Created on August 26, 2011
- 70. Joomla! Connect
- (News Feeds / Sample Data-Newsfeeds)
- http://feeds.joomla.org/JoomlaConnect
- Created on