- 1. Re: Suggested Audio Production Workflow
- (General Questions)
- ... just use the 744T and the Denecke slate. Time code can be added to picture when it is imported; and then just tell it all to sync to the audio timecode. Plural Eyes works great. Make sure you use the ...
- Created on September 12, 2012
- 2. Timecode issues with Arri Alexa
- (General Questions)
- ... and recorder. I was using Denecke TS-3 & Sound Devices 744T. I was jamming the camera straight to the recorder and we went through the proper options on the camera. It notified us that the Timecode jam ...
- Created on April 26, 2014
- 3. Why is Time Of Day (TOD) timecode used b
- (General Questions)
- ... else syncs from it. Begin by syncing the Denecke slate to the recorder. Then, the slate itself becomes a portable TC generator, and can be used to sync the camera to the slate, or multiple cameras to the ...
- Created on March 19, 2014
- 4. Wireless Booms?
- (General Questions)
- ... the body pack transmitter to the belt of the Boom Operator, and run a short jumper cable from the transmitter input from a Denecke PS-1 condenser power supply, also on the belt. Connect the mic cable from ...
- Created on October 03, 2011
- 5. Basic sound package for student productions
- (Production Planning)
- ... cable along with adapter cable to feed a Denecke TC slate. An AC adapter to power your rig. Also, some sort of battery powering, in case there is no available AC power. Headphones for the mixer and ...
- Created on March 22, 2019
- 6. Basic Equipment Package
- (Production Planning)
- ... for the recorder and mixer/fader controller are essential. One also needs to have the correct connecting cables to get timecode out of the recorder and into the Denecke slate. Always travel with a complete ...
- Created on February 02, 2015
- 7. User Guide to the Tascam HS-P82 for Film/Video Applications
- (Recorders)
- ... continuously run. FREE ONCE is similar to what Denecke would call a one-time jam sync. The generator will lock onto an incoming timecode signal, sync to it once, and then continue to run on its own after ...
- Created on November 29, 2011
- 8. CSUN Films FBI psa'
- (Fred's Blog )
- ... I completely agreed with the selection of mic, and felt good that my students remembered what they had been taught. The timecode of the Sound Devices702T recorder and Denecke TS-3 smart slate were set ...
- Created on November 01, 2011
- 9. Time Code and the High Definition Camera
- (Videography)
- ... that the jam sync occurs on the "00" frame. The zero frame is the start of the second (real time or not). All Denecke products have always done this so there is no problem there. If your recorder jams ...
- Created on August 28, 2011
- 10. Location Audio Settings for an Avid Media Composer 5 Workflow
- (Post Production)
- ... Special thanks to: Joe Schwartz (Calif State Univ Northridge, CTVA Dept), Sam Kauffmann (Boston Univ, author of Avid Editing), Charles Parra (Denecke Inc.), and Mike Paul (Location Sound Corp) for their ...
- Created on August 27, 2011
- 11. Recording Sound for Dinner Impossible
- (Audio Techniques)
- ... double system show. The cameras only have onboard mics with Denecke SB-2a time code sync boxes attached to them, no wireless receivers… no tethers. This gives the maximum amount of flexibility for the ...
- Created on August 23, 2011
- 12. Two-Track Mixing for Location Dialogue
- (Sound Design)
- ... our audio "double system" onto a multi-track digital recorder. A Denecke timecode slate will be used to provide a timecode reference as well as a failsafe clapstick sync mark for lining up the production ...
- Created on August 23, 2011
- 13. Introduction to Timecode
- (Recorders)
- ... matching up picture with audio. The standard of the industry is the timecode slate manufactured by Denecke, Inc. Older versions of these slates were "dumb" slates and could only display the timecode being ...
- Created on August 22, 2011
- 14. Class Projects
- (CTVA 358)
- ... audio in/out cables (such as TA3-XLR for some Sound Devices recorders) AC and battery power supplies Timecode out cable from recorder and possible input adapters to Denecke slate A second recorder, ...
- Created on August 19, 2011
- 15. Production Sound Class Projects
- (Sample Projects)
- ... audio in/out cables (such as TA3-XLR for some Sound Devices recorders) AC and battery power supplies Timecode out cable from recorder and possible input adapters to Denecke slate A second recorder, ...
- Created on August 19, 2011
- 16. Introduction to Wireless Microphones
- (Wireless)
- ... to a belt mounted battery power supply, such as the Denecke PS-1, and then the mic output from the power supply goes into the wireless. ENG vs. Rack mount ENG receivers are designed for field or camcorder ...
- Created on August 19, 2011
- 17. Selection and Use of Shotgun Microphones
- (Shotgun)
- ... and also plug directly into the MIC INPUT. Condenser mics require external powering, which can be a battery supply (such as the Denecke PS1A, shown below) located anywhere along the mic cable path. For ...
- Created on August 18, 2011
- 18. Microphone Powering
- (General)
- ... field work, the microphone powering can emanate from a battery supply, from some mixing panels, or from some recorders & camcorders. A few major audio companies (such as Denecke Inc and PSC) manufacture ...
- Created on August 17, 2011